Page 1 of 1
Nanokontrol2 problem with sliders and knob
Posted: Sun Jan 27, 2019 7:01 pm
by elcy
I have a problem with my nanokontrol2 , it is recognized in QLC , and in daslight (no problem in das light ) but impossible to affect a knob or a slider ,
but ok for button (?) .somebody had this problem ?
Re: Nanokontrol2 problem with sliders and knob
Posted: Mon Feb 25, 2019 3:41 am
by rrstudio2
I use a NanoKontrol2 and it works fine with QLC. One thing to check is by default the NanoKontrol transmits on different midi channels (slider 1 is midi channel 1, slider 2 is midi channel 2, etc). You can use the NanoKontrol software to change this and make them all transmit on the same channel.
-Andrew V. Romero
Re: Nanokontrol2 problem with sliders and knob
Posted: Tue Feb 26, 2019 6:29 pm
by AllanR
Have a look at my earlier thread, and try the attached test workspace plus profile.
viewtopic.php?f=30&t=11941&p=55312&hili ... ol2#p55312
All buttons, sliders, pots should work.