Page 1 of 1
color mixing more than RGB
Posted: Tue Oct 16, 2018 3:34 am
by tavonmarkov
I recently acquired 12 ETC D22 Lustr+ fixtures. The color channels are (in order) 1 Red, 2 White, 3 Amber, 4 Green, 5 Cyan, 6 Blue, 7 Indigo (+ 8 Intensity, 9 Strobe). Is there a color mixer or picker that can address all of these color channels? Or am I stuck with mixing colors manually?
Re: color mixing more than RGB
Posted: Tue Oct 16, 2018 7:18 am
by GGGss
You have to do it manually because:
a) QLC+ supports only RBG as we speak (colorwise)
b) a fixture with red, green, inidgo and lime are rare (the second one I came across thanks to you)
c) your computer and monitor cannot reproduce the full spectrum of colors you can produce.
But hey, since you already posses them ... create color collections to your preference and use them over and over again?
Re: color mixing more than RGB
Posted: Tue Oct 16, 2018 1:54 pm
by tavonmarkov
You have to do it manually because:
a) QLC+ supports only RBG as we speak (colorwise)
- Check. Got It.
b) a fixture with red, green, inidgo and lime are rare (the second one I came across thanks to you)
- RGB or CMY (+AW/UV) have always been the lights ive seen.
c) your computer and monitor cannot reproduce the full spectrum of colors you can produce.
A cool programmable X/Y or something would be cool.
But hey, since you already posses them ... create color collections to your preference and use them over and over again?
I plan to!