Q Light Controller+

On last weekend I controlled lights, sound/music and video projection in a theater play Un Lloc Comú by Joan Yago, performed by the amateur theater company Cercle Teatre.
My setup:

• Vant Moove15 laptop (Intel Core i5-8250u, RAM 16GB, NVMe Kingston A1000 240GB + 1TB HD)

• Ubuntu 18.04

• QLC+ 4.12.0 GIT

• Enttec DMX USB Pro

• A mix of PC, fresnel and profile conventional lights

• 25 dimmer channels

• 2 x NanoKontrol2

• Behringer U-Control UCA-202 USB Audio interface

• Jack Audio system with qjackctl and x42-meter

In the workspace for this play on the virtual console I put:

• 2 frames for the NanoKontrol2 interfaces representing it's buttons, knobs and sliders.

• 1 cuelist for music in a frame with a slider in submaster mode to control sound volume and a NanoKontrol2 button to advance steps.

• 1 cuelist for lights controlled with an slider to advancing steps.

• A frame for audio effects and pre-show music with an slider in submaster mode and some buttons to fire effects or music as desired.

• I setup some siliders in one of Nanokontrol2 to control some lights in punctual scenes.

While setting up the stage, placing and focusing fixtures I used the webinterface DMX Keypad via wifi from an Android phone and it works very well, and many other QLC+ features like dump to scene, etc.

Here is my workspace:
Some photos of my control setup and the stage: