Q Light Controller+

I have a behringer UCA202 and another cheap usb soundcard I got from ebay and I can't get the line in audio to work.

I have a Logitech USB headset and I was able to get that to work.

Has anyone had any success in getting the audio line in to work?

Please define "I can't get the line in audio to work"
Maybe gain is 0 or too low ?

I am running from an RCA output from a small audio mixer to an RCA input on the Behringer UCA202. The Behringer UCA202 has a monitoring option and I have a set of speakers connected to that so I've confirmed the Behringer is receiving a signal.



I have a HDMI cable connected to the Raspberry Pi and I can't see any sort of audio levels.

I've also tried turning the mixer volume up until its clipping

Please Delete the Thread, I got it working

Thankyou anyway.

L33nsta wrote: ↑Sun Oct 14, 2018 3:20 am Please Delete the Thread, I got it working
Thankyou anyway.

Would be nice to know how you fixed it, so that other users experiencing similar issues can be helped