Q Light Controller+

As always google thank you ... translated via google

My setup
1x Beyond laser software (Artnet universum2)
1x Kvant Clubmax
1x QLC + 4.11.2

Intended to accomplish a mixed laser and lightshow via QLC (I find the DMX control via Beyond too complicated)
For this purpose, I have created a fixture which also creates the cue's and pages and colors as macros via function assistant. (Works great) (see picture 1)
Since there are many but also very useful switches, but not with the complete DMX values ​​to bring the laser to work at all are the following question.

In the picture 2 you can see shows the required DMX values ​​in the scenes. In the picture 3 you can see the cues with the DMX values ​​created via macros.

The cue's DMX values ​​are controlled in channel 3. For the sides channel 2
How can I adjust the scenes in a slip with other values, ie channel 1 & 4-15 on the cue's & pages?
Copy and paste is not possible because the cues have to change constantly.

Or you can even install default values ​​on all channels in the fixture already?

I also add my fixture here

Here is the fixture

I love this program more and more

I just found out that I can also mark individual channels in Scene Edit - copy and paste in another scene
Perfect..

If this is still somehow the changes in several scenes at the same time would be even more perfect.