Page 1 of 1
Showtec Vintage Blaze
Posted: Tue Aug 14, 2018 9:47 am
by PiotrNowik
A nice retro vintage lamp + LED strips.
Manual is here ->
http://www.highlite.nl/silver.download/ ... _GB_V1.pdf
Re: Showtec Vintage Blaze
Posted: Sun Aug 26, 2018 2:30 pm
by mcallegari
Added, thanks
Re: Showtec Vintage Blaze
Posted: Mon Sep 03, 2018 8:32 pm
by PiotrNowik
I'm a little confused with this fixture definition.
I found there is an issue with it regarding the Intensity channel(s). This device has actually 2 dimmers - one is for tungsten lamp, second is master dimmer for RGB channels. So if one uses it with RGB matrix in VirtualConsole the playback fader controls the tungsten lamp channel not the RGB dimmer.
I have no good idea how to resolve this issue. Temporary I had modified the fixture definition and set the first channels as 'Effect' not the 'Intensity' and then set in the 'Channel properties configuration' applet (Fixtures tab) HTP instead of LTP behaviour.
Do You have any better ideas?
Re: Showtec Vintage Blaze
Posted: Tue Sep 04, 2018 9:18 am
by PiotrNowik
Small update: I found that setting tungsten lamp channel as 'Intensity - Yellow' may be a (good) solution.