Showtec Vintage Blaze

Here you can share your fixture definitions with the community
Forum rules
Post Reply
User avatar
PiotrNowik
Posts: 39
Joined: Tue Sep 13, 2016 6:31 am
Real Name: Piotr Nowik

A nice retro vintage lamp + LED strips.

Manual is here -> http://www.highlite.nl/silver.download/ ... _GB_V1.pdf
Attachments
Showtec-Vintage-Blaze.qxf
(6.6 KiB) Downloaded 46 times
---
Generic USB-DMX box(es)
Korg nanoKONTROL2
Windows 10
Top
User avatar
mcallegari
Posts: 4711
Joined: Sun Apr 12, 2015 9:09 am
Location: Italy
Real Name: Massimo Callegari
Contact:
Contact mcallegari

Added, thanks
Top
User avatar
PiotrNowik
Posts: 39
Joined: Tue Sep 13, 2016 6:31 am
Real Name: Piotr Nowik

I'm a little confused with this fixture definition.
I found there is an issue with it regarding the Intensity channel(s). This device has actually 2 dimmers - one is for tungsten lamp, second is master dimmer for RGB channels. So if one uses it with RGB matrix in VirtualConsole the playback fader controls the tungsten lamp channel not the RGB dimmer.
I have no good idea how to resolve this issue. Temporary I had modified the fixture definition and set the first channels as 'Effect' not the 'Intensity' and then set in the 'Channel properties configuration' applet (Fixtures tab) HTP instead of LTP behaviour.

Do You have any better ideas?
---
Generic USB-DMX box(es)
Korg nanoKONTROL2
Windows 10
Top
User avatar
PiotrNowik
Posts: 39
Joined: Tue Sep 13, 2016 6:31 am
Real Name: Piotr Nowik

Small update: I found that setting tungsten lamp channel as 'Intensity - Yellow' may be a (good) solution.
---
Generic USB-DMX box(es)
Korg nanoKONTROL2
Windows 10
Top
Post Reply

Return to “Fixture definitions”