Q Light Controller+

Hi,

I recently started working with Raspberry Pi. I have the QLC+ Image qlcplus_raspbian_stretch_20180410 download a week ago. I have gotten QLC+ running on the Pi and controlling lights and it is pretty nice, if a bit slower than on a PC. All these things are as expected and no surprise. However, I have not been able to import a show using the load project button on the web interface. When I do that it immeadiately freezes and goes to a refused connection screen. I am able to transfer files using WinSCP. The Web interface will transfer fixtures, but apparently QLC+ doesn't see them or I have put them in the wrong folder because I get an error when loading a project using the HDMI user interface that several fixtures are missing.
I made a small show file and it works fine. How is the best way to find out what entry in the show file is crashing the interface?

The file Test.qxw loads. 20180726 Howl2Go-2.qxw fails.

Is this as simple as not having blank spaces in the file name?

I really love the work you've done on this. This is really a great product. I love reducing the size of what I am hauling to gigs.

Ham

EDIT: I took out the spaces and dash in the file name and was able to import it with the web interface. Everything is working as well including the functions it couldn't find before.

I am not sure I made this clear in my original post. The large file works on both the RPi (with the HDMI interface) and the PC. It will not load with the Web Interface. When it starts through the HDMI interface it reports the fixtures that are missing definitions, but I have transferred these definitions using the Web interface. I suspect these are separate issues, but I have not exhausted the research on the missing fixture definition yet.

Ham