Q Light Controller+

Hello. I cant make the right Fixture for my Big Dipper LS10 moving heads. Somebody can help me?
I got problems with a Enttec USB interface. In freestyler it works, but in QLC is not working.

11 Ch (11ch)
# Type Presets
1 Pan 000-255 -270° 270°
2 Pan Fine 000-255 -270° 270°
3 Tilt 000-255 -100° 100°
4 Tilt Fine 000-255 -100° 100°
5 Color 000-139 Open Last140-255 Slow Fast
6 Gobo 000-063 Open-Last > Fixed
064-127 Open-Last > Shake
128-255 Slow Fast
7 Strobe 000-255 Slow Fast
8 Intensity 000-255 Min Max
9 PT Speed 000-255 Fast Slow
10 Chase 000-059 Open
060-084 Auto 1
085-109 Auto 2
110-134 Auto 3
135-159 Auto 4
160-184 Sound 1
185-209 Sound 2
210-234 Sound 3
235-255 Sound 4
11 Ctrl 000-249 Idle
250-255 Reset

2 problems (not related) in the same post will not help ...

ezescope wrote: ↑Mon May 28, 2018 8:22 pm I got problems with a Enttec USB interface. In freestyler it works, but in QLC is not working.

* Is your device recognised by your OS? (You did not mention Win / Apple / tomatoes / ...) -> Yes because Freestyler blabla
* Are you trying to use the Enttec while freestyler is running? A device can only be used once exclusive -> close freestyler
* Does QLC+ 'see' the enttec? Verify in [version you are using could be handy] -> actions to be taken depending on OS & Version
* Reboot (this always works in case of dubious user info)

All fun aside: If freestyler is running with the Enttec, why QLC+ isn't?

Hello. Here the definition of fixture with the data you provide, is incomplete, only 11 ch mode, but it must work
I never had problems with enttec flasks
if you use freestiler I deduce that you use windos ...
delete fresstiler, it may be starting from the beginning of windos and appropriating the enttec ....