Page 1 of 1
Image won't boot on Raspberry Pi3 Model B+
Posted: Thu Apr 12, 2018 3:44 pm
by helmet
Hello,
using the image qlcplus_raspian_jessie_20171028.img the Raspberry Pi 3 Model B+ (introduced in march) doesn't boot, only showing the colored square.
On Pi 3 Model B or Pi 2 booting is no problem.
Maybe Raspian jessie is the the cause.
Are there any plans for a new image using Raspian stretch?
Thank you!
Helmet
Re: Image won't boot on Raspberry Pi3 Model B+
Posted: Thu Apr 12, 2018 8:20 pm
by helmet
Found a workaround for this:
If you got another (older) Pi, run apt-get update and apt-get upgrade
After that, run rpi-update to get the latest firmware.
Finally edit config.txt in the boot folder and add
max_usb_current=1
Put the card in the Pi 3 B+ and everything should run.
Re: Image won't boot on Raspberry Pi3 Model B+
Posted: Fri Apr 13, 2018 7:30 am
by mcallegari
helmet wrote: ↑Thu Apr 12, 2018 3:44 pm
using the image qlcplus_raspian_jessie_20171028.img the Raspberry Pi 3 Model B+ (introduced in march) doesn't boot, only showing the colored square.
I am aware of that, in fact I've noted it -in yellow- in the RPi page of the QLC+ website.
helmet wrote: ↑Thu Apr 12, 2018 3:44 pm
Are there any plans for a new image using Raspian stretch?
Yes, I am finishing it these days
Re: Image won't boot on Raspberry Pi3 Model B+
Posted: Fri Sep 14, 2018 9:17 pm
by wis46264
Is there already a solutin? I just have the Raspberry Pi B+
Thanks for information.
Re: Image won't boot on Raspberry Pi3 Model B+
Posted: Sun Sep 16, 2018 9:02 am
by mcallegari
A new image has been released in 2018 that boots on RPi 3 B+. Are you using 20180410 ?