Q Light Controller+

Some fixtures have many channels. so in a situation were there may be many of the same fixture with many channels it can be hard to scroll through the list in the channel select dialog box. A Collapse/Expand all would solve this issue and greatly improve the UI experience for the user. I have attached an image to illustrate this.

Hello eric, I do not know if I understood well, but I think there is an option that would solve the problem, I enclose a capture so you can see what I mean, I understand that if you want to make a group of channels for example PAN, you want to activate in that group all the CH pan of that model of fixture, that if they are 12 fixtures it would be slow to mark one by one all the pan channels of the 12 fixtures ... that's why I told you that there is this option that you attached in the capture, you can you already knew and only I did not understand your suggestion ... Regards

Thanks for the reply!

Yes, I use the apply to all feature all the time but the problem is that most of the fixtures I work with have 14+ channels so it can be difficult to find what I need by scrolling. If I could collapse all the fixtures it would make this process much easier. The fixture editor has the functionality i'm looking for. See how the modes can be collapsed and expanded by clicking the green check mark. Please do let me know if more detail is needed.

Buttons added on GIT

Thank you!