Q Light Controller+

Good Morning,
I Have an Problem with the Raspberry Pi QLC+ testet Version 4.11.1 & 4.11.2 <- sry my Failure ... only testet with 4.11.1
QLC+ OSX 4.11.1

Raspberry Pi 3 Mod. B Version 1.2

If i Upload my Workspace to the Rpi the CPU load going oder 100% an QLC Freeze
if i Load the Workspace over the Rpi Home folder into QLC via Mouse, Keyboard and HDMI Display, the CPU Load go´s over 100% and Freeze.

The Rpi is Connected over Ethernet.
Only The USB Dongle for Mouse and Keyboard is Connected.
The Extern Midi Controller is NOT Connected. (an Self build Teensy controller)
and The DMX4All Dongle is also NOT Connected.

I Hope anyone can help me.

I don't see anything strange in your project, so there might be something missing in your report.

For example:
- which distro are you using ?
- did you build QLC+ yourself ? (4.11.2 doesn't exist yet)
- are there other processes running aside QLC+ that might use the same resources QLC+ needs ?
- what happens with another project ?

next time please add custom fixture definitions.

If I start your project in execute on win 10 I get a piano 'C' note playing ... ???
If I try to move your scanners - pan / tilt : the settings do not reflect in simple mode

Oh Sorry
4.11.2 was an failure... i use 4.11.1
I Used the 4.11.1 Raspberry Pi Full Image...
QLC+ on the Raspberry Pi- version 20171028

it based on RaspbianPi Jessie
Version Infos:
QLC+ updated to version 4.11.1
Qt libraries updated to version 5.9.2 LTS
kernel updated to version 4.9.35

GGGss wrote: ↑Sun Mar 25, 2018 12:37 pm next time please add custom fixture definitions.

If I start your project in execute on win 10 I get a piano 'C' note playing ... ???
If I try to move your scanners - pan / tilt : the settings do not reflect in simple mode

I added the Fixture.

Piano 'C'
im Using Midi 162 to feedback the Speed From QLC+ to an LED on My Midi Controller.

in an Older Version of This Workspace i Had no Problems,
Midi Controller was an BCF2000

(Incl. LED Speed Feedback and the same Scanner)

GOOd morning from Germany.
Thx for the info about the Pioano C
I found the problem at the teensy generated Midi note at ch 1 and note 62 & 63 for switching the timer pages.
Project is done and runs.
First long-term test begins Friday

If anyone is interested i can post the teensy script to.

It’s an tiny Midi Controler and he switch between midi clock input and tap / fade mode automatically.

Thx for the support.