Q Light Controller+

Hey there.
Weird question.

Is there a way to set the minimum value of a light or dimmer to a number higher than zero? Mainly on a fader, but potentially scene aswell.

Say if i want to have my convensionals at 3% as the min value instead of zero?

this would be so my parts and fresenels are always lit a small amount

See http://qlcplus.org/docs/html_en_EN/chan ... rties.html use Preheat 5% preset and maybe adjust to 3%.

janosvitok wrote: ↑Wed Feb 28, 2018 7:54 am See http://qlcplus.org/docs/html_en_EN/chan ... rties.html use Preheat 5% preset and maybe adjust to 3%.

Thank you.

This was helpful
Now I am just trying to figure out how to make new profiles within that.
It will not let me edit the 5% down to 3%

Very easy
select your fixture (here I had a generic dimmer)
press channel modifier
Change the title of the modifier. (I started with the standard 5% preheat)
drag the 2 points downward or select the points and change the DMX values
and press save button.

Then apply this preset to the other channels you want to apply this channel modifier

Great thanks.
Worked it out