Q Light Controller+

I found this bug that I define as critical
qlc+ 4.11.2.89 OS w10

as you can see in attached workspace if you go from scene 1 to 2 the value of scene 1 DON'T go to 0 instantly but follow the fade in time of the next scene. This is a very big issue if you whant to create asymmetrical crossfading between scenes, there is a workaround indoducing senes in between, but is a bit a pain if you have a lot of scenes as usually i have in theatre.

ok, i have not seen a previous post about same topic

Hi Maximortal,

There are many issues associated with fades in cues that seem to affect theatre operators more than others. I am sure Massimo is aware of them and QLC+5 will have solved the problems.

Anyway, a simple work around to your problem is to disable the channel of dimmer #1 in scene two.

Cheers

Mark

ok thanks for the tip