Hey guys,
I have a question regarding artnet input.
I want to connect one DMX Channel to multiple input buttons. So that e.g. every Value (0-255) triggers one button in the virtual console.
Ist that possible ?
I hope you can help me,
Kind regards,
Gerhard
Multiple Buttons on one channel
-
mdmayfield
- Posts: 71
- Joined: Wed Jun 15, 2016 8:51 am
- Real Name: Matt Mayfield
Might a Cue List with side fader in Steps mode work for your purpose?
-
gd360
- Posts: 21
- Joined: Sat Jun 17, 2017 9:58 am
- Real Name:
Good Idea, but unfortunately it doesn't work out.
I have to add the Information that I want to use this to start preprogrammed shows.
But nevertheless, it's not that urgent anymore because I am now using the webinterface of a raspberry pi running QLC+.
So I can just use buttons instead of sending DMX-Channels. If there is a solution to the original problem I would of course be interested in it anyway.
Kind regards,
Gerhard
I have to add the Information that I want to use this to start preprogrammed shows.
But nevertheless, it's not that urgent anymore because I am now using the webinterface of a raspberry pi running QLC+.
So I can just use buttons instead of sending DMX-Channels. If there is a solution to the original problem I would of course be interested in it anyway.
Kind regards,
Gerhard
-
siegmund
- Posts: 703
- Joined: Mon Nov 02, 2015 11:03 am
- Location: Germany
- Real Name: Lukas
Still this should be possible if you use the loopback plugin. Just use the channels of the scenes in the cue list as external input for the buttons, which have your shows assigned to them.