First step of a Sequence doesn't work, 2nd is ok.
Posted: Tue Jul 04, 2017 8:29 pm
Hi @ all,
I am currently working on a show and I am actually not quiet sure if it's my fault or an actual issue.
I have added several sequences and there is a strange behaviour. On some (not all) sequences the first step doens't change any DMX-Value.
The workaround for me is, that I make the first step before the actual needed one and that seems to work.
But I guess thats not a permanent solution.
I also just recognized that I have a red scene that makes a pink light and I have no clue why.
Additional Info:
The Dimmer mode of the fixtures is set to LTP
The first sequence of the show is a sequence that sets all Channels to 0.
Kind regards,
Gerhard
I am currently working on a show and I am actually not quiet sure if it's my fault or an actual issue.
I have added several sequences and there is a strange behaviour. On some (not all) sequences the first step doens't change any DMX-Value.
The workaround for me is, that I make the first step before the actual needed one and that seems to work.
But I guess thats not a permanent solution.
I also just recognized that I have a red scene that makes a pink light and I have no clue why.
Additional Info:
The Dimmer mode of the fixtures is set to LTP
The first sequence of the show is a sequence that sets all Channels to 0.
Kind regards,
Gerhard
