Q Light Controller+

Congratulations ! No errors detected.
Wow - what a waste

One tip: If the pan discription is needed, the "0" should be accepted. 360° is not the right type for a rotating head with no end - it's "endless" or "0". Bute maye a "online fixture validator" is neede these days

I got only the 44channel, so put my head off if you want. Not really finished, but all functions working. Tell me issues plz.
I hope, I helped anybody - moving heads are fun

stairville_bladesting_8_rgbw_beam_mover
stairville bladesting 8 rgbw beam mover
stairville blade

Rejected, for the following reasons:
1- your useless sarcasm
2- 3 of 4 DMX modes are missing (12ch, 16ch, 40ch)
3- invented channel descriptions (e.g. Rotation in clock, Rotation against clock)
4- for moving heads we don't use X/Y, we use Pan/Tilt (XY are normally used for lasers)
5- the fixture is clearly a moving head, not an effect