Q Light Controller+

Hello everyone

I'm just starting to use QLC+ with real USB to DMX interface and a 10w RGB par led, This is the hardware used:

https://www.aliexpress.com/item/Mini-US ... 0.0.I3XCdZ

https://www.aliexpress.com/item/US-EU-P ... 0.0.zBpyil

Cannot make it work. uDMX driver and plugin are recognized by QLC+, Fixture profile has been created with fixture creator. I've been using QLC with Magic 3D Easy View with success so I really know how to use the program. I have try the hardware on FREESTYLER and everything works fine, it is just that I don't like that program, I prefer QLC 1000 times. What is going wrong?. Cannot get even a beam of light.

Operating system ?
Can you please post the USB VID/PID of the adapter ?

I have already added the support for a chinese uDMX clone, but I suppose there's more on the market and every time they have to be added one by one.

Thanks for replying Massimo.

OPERATING SYSTEM:

LAPTOP: Windows 10

DESKTOP: Windows 7 Lite
(I haven't tried it there yet)


This is what I've found for the uDMX device

Manufacturer: Haiking technology co.,Ltd
Device Type: libusb-win32 devices

VID/PID

USB\VID_16C0&PID_05DC\ILLUTZMINATOR001

USB\VID_16C0&PID_05DC&REV_0102
USB\VID_16C0&PID_05DC

Hi to all.

I messed around with fixture channels and fixed an issue. Apparently a wrong configuration was causing channel overlaping. This fixture is rated as 8 channel but only states 7 in user's manual. Channel 8 is "empty". I added the fixtures to QLC as 8 channel and it worked fine. Any idea of what this empty channel 8 is it for?

Please, can you attach the fixture profile?
I have the same type of light and i am not able tu compile fixture .
Thanks in advance.

Hello,

And finally, this USB DMX model is working good with QLC+?
Or can someone give me advice on a well working Chinese clone USB DMX with QLC+?
Thank you