I can't find the point where i made my mistake, any suggestions? (Raspi3, XFCE, Raspbian, Squeezebox server daemon)
the collection contains:
Position, Dimmer and Color Collections for all 16 MHs
Dimmer and Color Collections for all 8 LED-Pars, 12 LED-Bars
Modus Scene of All 12 LEDbars
SPECIAL Scene for FaderGroup "ALL Strobe" with 37 different Strobe Values for WASHs, PARs, BARs, 1x 3500W Strobe
[PARTIALLY SOLVED] Collection Button resets all Speed factors to 1 ?!
-
mEon
- Posts: 15
- Joined: Sun Nov 13, 2016 4:13 pm
- Real Name:
Got the point:
1. Removed all Contents step by step
1.1 The Special Scene sets the Speed factor. Why?
2. Checked every channel of the Special Scene
2.1 The 3500W Stroboskop Channel is a Speed Control Channel, must be the evil!
Solution:
1. Copy the fixture of the Strobo from /usr/share/qlcplus/fixtures/ to $HOME/.qlcplus/fixtures/
note: $HOME=/home/USERNAME, in Raspbian's case =/home/pi
1.1 Edit the fixture with fixture editor and set CH1 to FX oder Intensity Type instead of Speed Control
1.2 Don't rename the fixture so QLC takes the fixtures in $HOME as priority even after QLC updates
2. If all Channels set by collection are NOT Speed Controls, the factor should stay as set in Virtual Console
1. Removed all Contents step by step
1.1 The Special Scene sets the Speed factor. Why?
2. Checked every channel of the Special Scene
2.1 The 3500W Stroboskop Channel is a Speed Control Channel, must be the evil!
Solution:
1. Copy the fixture of the Strobo from /usr/share/qlcplus/fixtures/ to $HOME/.qlcplus/fixtures/
note: $HOME=/home/USERNAME, in Raspbian's case =/home/pi
1.1 Edit the fixture with fixture editor and set CH1 to FX oder Intensity Type instead of Speed Control
1.2 Don't rename the fixture so QLC takes the fixtures in $HOME as priority even after QLC updates
2. If all Channels set by collection are NOT Speed Controls, the factor should stay as set in Virtual Console
-
mEon
- Posts: 15
- Joined: Sun Nov 13, 2016 4:13 pm
- Real Name:
final Question:
After changing all Channels QLC still uses the ex-Speed-Channels still to reset SpeedFactor to 1.
--> Do i have to delete and reload all Fixtures for QLC seeing no more Speed Channels?
--> Or do i only have to delete and rebuild the Channel Groups?
Finally: Where are the Channel types Cached?
PARTIALLY SOLUTION: (simplest and fastest)
i set the Factor for each EFX manually in the Functions Tab of the Speed Wheel in Design Mode,
So the Speed Wheels global factor can stay at "1"
After changing all Channels QLC still uses the ex-Speed-Channels still to reset SpeedFactor to 1.
--> Do i have to delete and reload all Fixtures for QLC seeing no more Speed Channels?
--> Or do i only have to delete and rebuild the Channel Groups?
Finally: Where are the Channel types Cached?
PARTIALLY SOLUTION: (simplest and fastest)
i set the Factor for each EFX manually in the Functions Tab of the Speed Wheel in Design Mode,
So the Speed Wheels global factor can stay at "1"