Page 1 of 1
Collection flashable ?
Posted: Thu Apr 27, 2017 12:36 pm
by mEon
If a collection contains static content, shouldn't it be flashable (for positions, ...)?
--> Maybe there could be "Flash function (only for scenes)" extended to only for scenes and static collections?
Best regards
Re: Collection flashable ?
Posted: Thu Apr 27, 2017 5:16 pm
by mdmayfield
There's a way you could accomplish something like this right now, although it requires a bit of set up. It involves Loopback controls. I've attached a sample project that shows how it works.
Re: Collection flashable ?
Posted: Thu Apr 27, 2017 10:03 pm
by mEon
Genius!
Re: Collection flashable ?
Posted: Fri Apr 28, 2017 10:35 am
by mEon
Just came to a little follow-up question:
Is there a way to restore previous Values by releasing the Flash-Loopback ?
Actually the values will be set to zero, even if they were at 100 before they became flashed to 255.
Re: Collection flashable ?
Posted: Fri Apr 28, 2017 3:14 pm
by mdmayfield
Hm, here it gets a bit more complicated, if you want to be able to use faders on the Collections while at the same time bumping them with Flash buttons.
When I put the test together, I was intending to hide away those knobs in a collapsed frame somewhere - meaning that they would be only "internal" and that the light operator would never touch them.
If you want to be able to set one of those Collections to, say, 60% and bump it up to 100% with the Flash button, you'll need to make "remote control" faders or knobs for Loopback Helpers 1-4, and still hide away the original knobs (the ones that are controlled *by* LH 1-4, but which actually *set* the % of the Collections).
That way, HTP will act on the Loopback Helpers (which QLC+ thinks are dimmers) and remote-control the Collection knobs to allow what you're talking about. See attached (open the Hidden Frame to see the old knobs).