Page 1 of 1
EFX patterns diy
Posted: Sun Apr 16, 2017 1:42 pm
by johnateallthepies
Is there a way of editing the patterns?
There only seems to be one with quick jumps between points (Squarechoppy), which is great for scanners that can jump from one position to another.
Can I invent my own shapes or change the ones that are there?
Re: EFX patterns diy
Posted: Mon Apr 17, 2017 8:27 am
by mcallegari
Changed the title. The patterns you're talking about are for EFX, not RGB Matrix.
And no, you can't create your own. They are mathematical formulae hardcoded in the QLC+ internals, based on
parametric equations.
Can you give us an example of a pattern you would need ?
Re: EFX patterns diy
Posted: Wed Jan 03, 2024 4:27 pm
by Sidlomydlo
Hi Masiimo,
what about half-circle? Would it be possible? Missing that one mostly.
Thanks!
Re: EFX patterns diy
Posted: Wed Jan 03, 2024 4:53 pm
by MichelSliepenbeek
Select Pattern = Lissajous and set X-Frequency = 1 and Y-Frequency = 2.
Use Y-Fase (= 0 or 180) to set the direction (in other words: to select which half off the circle you want
).
Re: EFX patterns diy
Posted: Sun Jan 07, 2024 12:12 am
by Yestalgia
MichelSliepenbeek wrote: ↑Wed Jan 03, 2024 4:53 pm
Select Pattern = Lissajous and set X-Frequency = 1 and Y-Frequency = 2.
Use Y-Fase (= 0 or 180) to set the direction (in other words: to select which half off the circle you want
).
Wow that's cool, thanks for the tip!
Re: EFX patterns diy
Posted: Mon Jan 08, 2024 10:47 am
by Sidlomydlo
Oh, don't understand how I could have missed this. Thanks!