Chauvet COLORband T3 USB
Posted: Wed Feb 08, 2017 4:38 am
Hi all,
Newbie here, got a bunch of new fixtures in at work and simultaneously learning QLC+... seems to be quite intuitive compared to the Magic-Q setup we use.
Please let me know if I screwed anything up, I used another COLORbeam profile included in QLC+ as a template to build this one, so it should be good to go. It passed the online verification and I made sure to add every mode.
Edit: looks like it's common practice to link to the manual so added the manual below.
https://www.chauvetdj.com/wp-content/up ... ev2_WO.pdf
Cheers!
Newbie here, got a bunch of new fixtures in at work and simultaneously learning QLC+... seems to be quite intuitive compared to the Magic-Q setup we use.
Please let me know if I screwed anything up, I used another COLORbeam profile included in QLC+ as a template to build this one, so it should be good to go. It passed the online verification and I made sure to add every mode.
Edit: looks like it's common practice to link to the manual so added the manual below.
https://www.chauvetdj.com/wp-content/up ... ev2_WO.pdf
Cheers!
After 20yrs strugling I found QLC+ -> wooow