Help to Gobo / Fixture

Ask a generic question about the usage of QLC+, not related to a particular operating system
Forum rules
Post Reply
asm
Posts: 58
Joined: Sun Jul 17, 2016 8:22 am
Location: Denmark
Real Name: Allan Madsen

Hi
I have a Fixture, Robo DJ Scan 150xt.
In some of the Gobo you can control the speed of fx Strobe effect from slow to fast (max 8FPS) by using a Value between 064 and 127 on the Gobo channel, is there a way to control that in QLC+?

Sorry for my bad English I am Danish. :-)
Top
User avatar
GGGss
Posts: 3052
Joined: Mon Sep 12, 2016 7:15 pm
Location: Belgium
Real Name: Fredje Gallon

in virtual show make a slider
set it to level-mode
change the minimum to (064) and maximum to (127) levels
Select the fixture and channel you want to control
there you go

Well documented in : http://www.qlcplus.org/docs/vcslider.html
All electric machines work on smoke... when the smoke escapes... they don't work anymore
Top
asm
Posts: 58
Joined: Sun Jul 17, 2016 8:22 am
Location: Denmark
Real Name: Allan Madsen

Thanks for your help.
I am new to all of this DMX and sometime you don't know what to look for :-)
Top
Post Reply

Return to “Generic”