Q Light Controller+

Hello,

I use EFX functions for my LightmaXX Easy Wash QUAD LED (self-made fixture). They have been working well with 4.10.4 and 4.10.3 (not tested older releases), but now with 4.10.5b they do not move anymore. All movements and other functions aside the EFX functions are still working properly with the moving heads, that's why I think the fixture must be ok. I have tried to create new EFX functions already and that does not work either.

Any idea?

Thanks and best regards
Ben

Please post your custom fixture, your workspace and the steps to reproduce the issue you're seeing.

Saying "it doesn't work" doesn't help much

Here you go, thanks

Ah and "by the way": I use Windows 10 with the Enttec Open DMX USB Interface.

As I suspected, your fixture is messed up.
Check it with the online fixture validator: http://www.qlcplus.org/fixture_validator.php
There are 8 errors.

Previous QLC+ versions allowed a bad usage of Pan/Tilt fine. 4.10.5b doesn't allow it anymore. The definition must be correct.

P.S. "Ran/Tilt Speed"...really ? "Movment" ?

Yes there are some typos, thanks for reminding me. The fixture validates now and I will try again later when I am in the studio.

The online validator is really helpful, I was not aware of it.

Thank you so much!

Just to let you know: It is working now in 4.10.5b!

Thanks again and best regards
Ben