Q Light Controller+

Hello guys,

first i will wish all people in this forum a merry christmas.

I will have in this days a little bit time for my great project.

My controller (Sandevice E682) works very well and can be controlled by QLC from Windows or Mac.

Now i would be a little Programm with 60Led`s run over a rasp3.

The surface can be reach, input is adjusted from E682 output is 127.0.0.1

A test with this settings don´t work or the led don´t work.

I would a matrix (2x30 Leds) in the moment only in the effekt "Plasma" that works on the rasp.

can me anyone send the file for the rasp so does it works

thanks

Hey ted,

the same to you!

Sorry but I'm not able to guess what you are trying to tell us. If you are looking for a way to start automatically in operate mode as the title says, please have a look at the command line options: http://www.qlcplus.org/docs/commandlineparameters.html

Regards,
siegmund

Hello siegmund,

i will mean the automatically start in a Rasperry, the setting will be right on this, but nothing will done when power on the rasperry.

I think my Matrix setting are doesn´t right or wrong stored.

greetings