Prefab Widget APCmini & dmx board 48

This is a place for sharing with the community the results you achieved with QLC+, as a sort of use case collection.
You can share photos, videos, personal hardware/software projects, interesting HOWTO that might help other users to achieve great results.
Post Reply
User avatar
jadaudiodesign
Posts: 35
Joined: Wed Jun 17, 2015 5:33 pm
Location: Switzerland Geneva
Real Name: Jean-Daniel Garcia
Contact:

hello everybody

i had often to rebuild a new workspace, but didnt want to redesign always same widgets virtual board...
so i saved them in .txt, like that you can easy import in your existing virtual console

just copy and paste...before that last line in your .qxw file

</Frame>
<Properties>
<Size Width="1920" Height="1080"/>
<GrandMaster ChannelMode="Intensity" ValueMode="Reduce" SliderMode="Normal"/>
</Properties>
</VirtualConsole>
<SimpleDesk>
<Engine/>
</SimpleDesk>
</Workspace>

for the APCmini i made solo frame for each line, i can choose the color of my LED end i use the slider down for dimmer...you can customize as you want
for the dmx board 48, it works well with scene setter board for exemple

hope is usefull for someone
regards JD

Image
Image
Attachments
dmx board 48.txt
board48
(56.15 KiB) Downloaded 266 times
apc mini.txt
apcmini
(52.64 KiB) Downloaded 1064 times
User avatar
DarkMark
Posts: 6
Joined: Sat Sep 09, 2017 8:14 am
Location: Stuhr / DE
Real Name: Mark Baar
Contact:

Beautiful and extremely useful. Thanks a ton!
bluescreen25
Posts: 55
Joined: Fri Jul 21, 2017 4:52 pm
Real Name: Ralf Janssen

Thanks a lot :D

I bought APC Mini today and now i find this code. :)
djhurt
Posts: 37
Joined: Wed Jul 18, 2018 5:22 pm
Real Name: JERRY MANSILLA

me too, i hope i can figure out how to do this hehehe!
Ogwy
Posts: 1
Joined: Fri Jan 20, 2017 6:09 pm
Real Name:

Hello ,

Very good Job ! Thanks !
djdanx
Posts: 1
Joined: Sun May 26, 2019 1:55 pm
Real Name: dany djdanx

hello, I would like to have this APC mini visual, but I don't understand your filesystem! is there a file directly in .QXW ?? thank you :D :D
User avatar
edogawa
Posts: 630
Joined: Thu May 07, 2015 10:34 am
Real Name: Edgar Aichinger

It's XML, so you have to get the nesting right...

To see where exactly to insert, I've done this:

- launch QLC+
- immediately save the workspace, call it "empty.qxw"
- add a single button
- save as "button.qxw"
- quit QLC+
- launch a text editor (KDE kate here) and open both qxw files as well as "apc mini.txt"
- replace the button tag in "button.qxw" (everything from and including <Button ... > to </Button>) by the complete content of "apc mini.txt"
- save as "apcmini.qxw"

load this new file apcmini.qxw in QLC+ and voila!

The indentation is off after pasting the snippet, but QLC+ will correct this automatically at next save.

Also be aware that this just creates the complex widget, you'll still have to set up the workspace for your I/O hardware, input profile, fixtures/dimmers, MIDI mapping of sliders/knobs etc. ...

HTH
Attachments
apcmini.qxw
(53.91 KiB) Downloaded 192 times
Post Reply