Q Light Controller+

Hello,

I need again your help.

I have 8 LED Bars with 16 RGBW LED´s.

So at first I take them all as ficktures in my show. The adresses runs from 1 to 512 (each has 64 DMX Channels). Thats good.

Now I take the same to a RGB Matrix. 1-7 goes to Univers 1 and the last to univers 2.

Beside are to screen shots to explain. I cant´find the mistake or what I am doing wrong.

I need the Matrix for a show on weakend.

Thanks for help

Hi,

I understand that instead of special fixtures you want to use rgb panel. Right?

Can you attach your qxw file here, so we can have a look at it?

Jano

Herbert,

you don't need to post anything. You've found a genuine bug in QLC+. I've fixed it in git.
So either:
- open qxw file in text editor, and adjust the address of the last row (note that universes and addresses are zero-based, so universe 1 channel 449 is written as 0, 448)
- linux: compile from sources
- windows: grab the fresh QLC+ from https://ci.appveyor.com/project/mcalleg ... 4.10.5.252 once it is built

Jano

thanks a lot.

Thats a great help.

I will test it.

best wishes and a nice Christmas to all.

herbert

Hi,

it works. thanks.