Page 1 of 1
strobe problem in qlc+
Posted: Mon Aug 08, 2016 12:58 am
by manulon21
Hi, Im manuel. I starte using qcl+ with two Wash 36x3 moving heads. I created de fixture and when i open the program an turn de intesity and then the colors it stars to strbe slowly, and if i turn the strobe channel on it keeps strobing so i dont know how to solve it. If anyone can help me i will be very greatful. Thanks
Re: strobe problem in qlc+
Posted: Tue Aug 09, 2016 9:01 am
by siegmund
Hi Manuel, welcome to QLC+ and the forum.
Please share your workspace file, as well as your fixture definition, for help.
Re: strobe problem in qlc+
Posted: Tue Aug 09, 2016 9:01 am
by manulon21
siegmund wrote:Hi Manuel, welcome to QLC+ and the forum.
Please share your workspace file, as well as your fixture definition, for help.
Hi, there is my workstation and my fixture. I work with two 36x3w wash beam. I made the fixture. I wait for a help
Re: strobe problem in qlc+
Posted: Fri Aug 19, 2016 4:20 am
by manulon21
Hi, there is my workstation and my fixture. I work with two 36x3w wash beam. I made the fixture. I wait for a help