Page 1 of 1
Image don't work
Posted: Tue May 31, 2016 6:14 pm
by holgerweigert
I wrote the image, put it in the pi and it ask me for a login, after login nothing happend.
How can I start Qlcplus?
what' wrong?
Why is no Autostart?
Re: Image don't work
Posted: Tue May 31, 2016 7:03 pm
by mcallegari
Probably corrupted image ?
Have you checked against the provided MD5 ?
Re: Image don't work
Posted: Mon Jun 06, 2016 4:14 pm
by thomas
Hello,
the same with my image.
md5 is ok.
there is no pid for qlcplus with ps -A.
thanks for help.
Re: Image don't work
Posted: Mon Jun 06, 2016 6:06 pm
by mcallegari
Raspberry 2 or 3 ?
What if you start QLC+ manually with
does it work ?
Re: Image don't work
Posted: Tue Jun 07, 2016 7:50 am
by thomas
Its a B+ raspberry.
Start with >sudo service qlcplus start< is accepted without error - but no pid for qlc+.
>sudo service qlcplus status< says 'qlcplus service running [406]' (or somthing else) - but no pid 406 in ps -A.
Re: Image don't work
Posted: Tue Jun 07, 2016 9:02 am
by mcallegari
Again, Raspberry 2 or 3 ?
Raspberry Pi 1 is not supported anymore.
Re: Image don't work
Posted: Tue Jun 07, 2016 9:50 am
by thomas
its 1.
Re: Image don't work
Posted: Sun Jun 12, 2016 9:55 am
by holgerweigert
with PI 3 it work's. Thank's