OSC Connection fails after a while (OSX & QLC 4.9.1)

Archive of the non-categorized posts related to the QLC+ technical support.
Please do not create new threads here, instead, use the categories above !
Post Reply
chapeau_melon
Posts: 13
Joined: Tue Nov 03, 2015 8:50 am
Real Name:

Hello,

Back to the original post subject... I'm new to QLC and OSC ... I, till now, handled most of the things I wanted using both excellent pieces of software (Thanks to the creators !) ... except I now have the same issue... QLC fails to react to OSC input after a while :(...

I read this post, and indeed, the switch between 127.0.0.1 works ... but in the heat of the action, I don't want to stress on this :( ...

What is the latest news on this ?

Thanks in advance,

Have a nice day !
Top
User avatar
mcallegari
Posts: 4827
Joined: Sun Apr 12, 2015 9:09 am
Location: Italy
Real Name: Massimo Callegari
Contact:
Contact mcallegari

chapeau_melon wrote:What is the latest news on this ? !
Thr latest news is that QLC+ 4.10.1 should work now. Have you tried it ?
Top
chapeau_melon
Posts: 13
Joined: Tue Nov 03, 2015 8:50 am
Real Name:

I'm on the latest downloadable version 4.10.1 ... I (still) have the issue... :(
Top
User avatar
mcallegari
Posts: 4827
Joined: Sun Apr 12, 2015 9:09 am
Location: Italy
Real Name: Massimo Callegari
Contact:
Contact mcallegari

chapeau_melon wrote:I'm on the latest downloadable version 4.10.1 ... I (still) have the issue... :(
Then please explain again your setup and what you're doing. Thanks
Top
chapeau_melon
Posts: 13
Joined: Tue Nov 03, 2015 8:50 am
Real Name:

Doing nothing special... I attached some screenshots of the setup.

Just playing around and then for now obvious reason, the TouchOCS (still gives output - blinking green led) is not read anymore by QLC...
It is 'what ought to be' random, I cannot think about a fixture or scene or whatever that causes the halt.

As suggested in this post, switching to and back from 127.0.0.1 reconnects the TouchOCS
Capture1.PNG
Capture2.PNG
Capture2.PNG (5.58 KiB) Viewed 2272 times
Capture3.PNG
Capture3.PNG (7.09 KiB) Viewed 2272 times
more in second post...
Top
chapeau_melon
Posts: 13
Joined: Tue Nov 03, 2015 8:50 am
Real Name:

Capture5.PNG
Capture4.PNG
Top
chapeau_melon
Posts: 13
Joined: Tue Nov 03, 2015 8:50 am
Real Name:

I'm running on Windows 7 64 - SP1
TouchOSC is running on my Ipad V2
Enttec DMX USB Pro MK2

Could it still be an "overload" of data ? ... I play quit a bit with the TouchOSC ... with the sliders ... going from one fixture to another ... etc...

TouchOSC is configured as follows :

- no doubletap / no flip / no Ping / no Accelerometer / no TouchMessages
- MidiBridge disabled
- CoreMidi disabled
V 1.9.4
Capture7.PNG
Capture6.PNG
Top
User avatar
mcallegari
Posts: 4827
Joined: Sun Apr 12, 2015 9:09 am
Location: Italy
Real Name: Massimo Callegari
Contact:
Contact mcallegari

You must be kidding me.
This thread is called "OSC Connection fails after a while (OSX & QLC 4.9.1)" and you report an issue on Windows 7.

4.10.1 for Windows still has the OSC issue. You need to use a TEST version that I built later: viewtopic.php?f=12&t=3135

Next time, please provide the necessary information since the beginning. It saves time to everybody.
Top
chapeau_melon
Posts: 13
Joined: Tue Nov 03, 2015 8:50 am
Real Name:

My deepest apologies :(

I continued on this post since I thought OSX was in relation to the OSC soft on the Ipad :oops:

Again sorry for the annoyance :( ... I'll read the post you pointed !
Top
chapeau_melon
Posts: 13
Joined: Tue Nov 03, 2015 8:50 am
Real Name:

For what it's worth, if other 'dumb' people like me would stumble on this post ... with the latest beta version provide in this post, it works like a charm on Windows...

Thanks again for all the help !
Top
Post Reply

Return to “Archive - no new threads please”