Q Light Controller+

qmake: command not found

janosvitok wrote:I'm thinking that if I find some time I may implement config file setting for MIDI plugin that will do this.

Veaceslav22 wrote:

janosvitok wrote:I'm thinking that if I find some time I may implement config file setting for MIDI plugin that will do this.

Thank you very much

janosvitok wrote:I'm thinking that if I find some time I may implement config file setting for MIDI plugin that will do this.

Veaceslav22 wrote:What we need is to have the controller button with led lights works. They have three colors. Let the red is off, green on, even be true. Then it is clear what the scene on, which are not. So users like me, not programmers, it is difficult to do. You could make a QLC+ version specifically for Akai APC Mini, it would be very nice and would all be grateful.

Maikel Boerebach wrote: This is the part I have changed in lines 138 to 145:

else if (channel >= CHANNEL_OFFSET_NOTE && channel (channel - CHANNEL_OFFSET_NOTE);
*data2 = DMX2MIDI((value==0) ? 3 : value);
}
In the 6th line "3" represents the midi-value for the On state. When you play with these you can change the colors to green,red,amber(orange). And you can choose to let the LEDs flash. In the other thread i have posted a text-file which describes which values you need to get certain colors.
For your convenience i have also attached the midi protocol.cpp file.

error: /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/install_name_tool: can't open file: /Users/admin/QLC+.app/Contents/Frameworks/QtSerialPort.framework/Versions/5/QtSerialPort (No such file or directory)
make[1]: *** [install_LIBQTSERIALPORT_ID] Error 1
make: *** [sub-macx-install_subtargets-ordered] Error 2
Installation error. Aborting package creation.

sudo port selfupdate
sudo port install libftdi0 pkgconfig libmad libsndfile portaudio liblo fftw-3 ola

git clone git://github.com/mcallegari/qlcplus.git

export PATH=$PATH:/users/admin/Qt/5.5/clang_64/bin
cd qlcplus
qmake -spec macx-g++
make

make install

./create-dmg.sh

msccd wrote:thank You very much for Your work. I used Your midiprotocol and it worked fine on the mac (to be honest it's a virtual machine I set up for compiling). Now I was up to create the dmg file to install it on my macbook, which will be the machine where I'll work with QLC+.

mcallegari wrote: APC devices and LED colors are now supported out of the box by QLC+.
Check this out: viewtopic.php?f=5&t=9016

mcallegari wrote: By the way, the build instructions you posted are wrong.
I'm not surprised QLC+ can't find the Qt libraries.
My instructions are correct, but apparently it seems you haven't followed them. Surely not when it says "If you see any errors, please report it in the QLC+ forum (development forum)."
Also, it is useless to do make/make install and then create-dmg.sh. If you had a look at that script, you might have found that it does make distclean/qmake/make/make install/DMG creation