Suggestions - QLC GIT

Jimmy T. · Mon Sep 01, 2014 1:40 am

Add menu option for users to change and save IP address for Ethernet.

I see there is a way in the Web Interface but not on the console interface. You can not get to the web without a valid IP address.

I changed mine by editing the interfaces file in terminal mode and rebooted. Many user will not know how to do that.

Massimo Callegari · Mon Sep 01, 2014 8:57 am

Jimmy, the Raspberry Pi image is configured how most of the commercial routers and network devices are:
it comes with a default static IP address (written in the user guide) so you can access the device via web and then change the IP to dynamic or another static one.

I don't think when you receive a router you ask for a console access (which most of them don't have anyway)
Changing the IP manually is an option but it is not suggested in this case.

Jed Holmes · Sat Nov 08, 2014 2:41 pm

Add suport for Bluetooth keyboards and mice

Massimo Callegari · Sat Nov 08, 2014 3:08 pm

Jed, QLC+ has nothing to do with bluetooth support.
Have you tried to google it before posting ?
Found this in 10 seconds:
http://www.correlatedcontent.com/blog/b ... pberry-pi/

http://www.ctheroux.com/2012/08/a-step- ... pberry-pi/

Jed Holmes · Mon Nov 10, 2014 4:41 pm

How do you get into the desktop environment, as you need this do do the things the websites suggested, because I need a command line emulator?

Thanks for your support,
Jed

Massimo Callegari · Mon Nov 10, 2014 7:27 pm

Jed, there is no desktop environment in the Raspberry Pi image, and all the commands you see in the links above, can be given on a shell access via SSH.

I get you are a Windows user, since you don't know that Unix systems don't have terminal emulators...they actually have the real ones !