I'm using Nanokontrol 2 and using 2 knobs to control X and Y in XY pad (VC). Need to have SHIFT (on Nanokontrol) button for fine control (like SHIFT button on keyboard).
Sorry for bad English.
Fine positioning XY pad via external controller
-
DJLadonin
- Posts: 12
- Joined: Thu Jan 10, 2019 11:20 am
- Real Name: Ladonin Daniil
Hello everybody.
I'm using Nanokontrol 2 and using 2 knobs to control X and Y in XY pad (VC). Need to have SHIFT (on Nanokontrol) button for fine control (like SHIFT button on keyboard).
Sorry for bad English.
I'm using Nanokontrol 2 and using 2 knobs to control X and Y in XY pad (VC). Need to have SHIFT (on Nanokontrol) button for fine control (like SHIFT button on keyboard).
Sorry for bad English.
With best regards, DJ_Ladonin
Using QLC 4.12+Macbook Pro+EnttecPro+Nanokontrol 2
Using QLC 4.12+Macbook Pro+EnttecPro+Nanokontrol 2
-
Khan
- Posts: 1
- Joined: Mon Jan 06, 2025 3:47 pm
- Real Name: Evan Merewether
I would also like to get improved positional resolution when sending remote commands to the XY pad using MIDI or Art-net. In addition to the single port to set the coarse position of the pan (tilt) value, I would like to see a second port for fine positioning information that is a fraction of the coarse resolution.