Yiflamefly Beam 450W Moving Head Lights
-
gsekkesater
- Posts: 2
- Joined: Fri Nov 29, 2024 11:55 am
- Real Name: Geir Sekkeseter
Hope it works. Haven't tried it yet.
- Attachments
-
Beam-moving-head-lights-450W.qxf- (7.01 KiB) Downloaded 36 times
-
MichelSliepenbeek
- Posts: 785
- Joined: Wed Feb 08, 2023 10:24 am
- Location: Nederland
- Real Name: Michel Sliepenbeek
I'm sorry, it will not work. 
If you use the Fixture Definition On Line Validator (https://www.qlcplus.org/fixture_validator.php) you will find:
ERROR: channel <Strobe> group should be set to 'Shutter'
ERROR: channel <Colorful> capability with empty description. Please write one.
ERROR: channel <Frost> capability with empty description. Please write one.
ERROR: channel <PAN fine> control byte should be set to Fine (LSB)
ERROR: channel <TILT fine> control byte should be set to Fine (LSB)
ERROR: channel <Reset> capability with empty description. Please write one.
ERROR: channel <Reset> capability with empty description. Please write one.
ERROR: channel <Reset> capability with empty description. Please write one.
ERROR: channel <Reset> capability with empty description. Please write one.
ERROR: channel <Lamp open> capability with empty description. Please write one.
ERROR: channel <Lamp open> capability with empty description. Please write one.
ERROR: channel <Lamp open> capability with empty description. Please write one.
ERROR: channel <Led strips speed> group should be set to 'Speed'
ERROR: no modes found in this definition! Please define some.
Furthermore you need to change the Type of your "Lamp Open" channel (to Maintenance ?).
As it is Intensity now, it will override your Dimmer Channel.
It is very strange that you use the Channel Number as Default Value for a Channel?
This does not make sense.
If you use the Fixture Definition On Line Validator (https://www.qlcplus.org/fixture_validator.php) you will find:
ERROR: channel <Strobe> group should be set to 'Shutter'
ERROR: channel <Colorful> capability with empty description. Please write one.
ERROR: channel <Frost> capability with empty description. Please write one.
ERROR: channel <PAN fine> control byte should be set to Fine (LSB)
ERROR: channel <TILT fine> control byte should be set to Fine (LSB)
ERROR: channel <Reset> capability with empty description. Please write one.
ERROR: channel <Reset> capability with empty description. Please write one.
ERROR: channel <Reset> capability with empty description. Please write one.
ERROR: channel <Reset> capability with empty description. Please write one.
ERROR: channel <Lamp open> capability with empty description. Please write one.
ERROR: channel <Lamp open> capability with empty description. Please write one.
ERROR: channel <Lamp open> capability with empty description. Please write one.
ERROR: channel <Led strips speed> group should be set to 'Speed'
ERROR: no modes found in this definition! Please define some.
Furthermore you need to change the Type of your "Lamp Open" channel (to Maintenance ?).
As it is Intensity now, it will override your Dimmer Channel.
It is very strange that you use the Channel Number as Default Value for a Channel?
This does not make sense.
A QLC Workspace is like a Bob Ross painting: "it's your world, you can create whatever you want!"
-
gsekkesater
- Posts: 2
- Joined: Fri Nov 29, 2024 11:55 am
- Real Name: Geir Sekkeseter
Thanks a lot for your reply. Its my first time trying out this. I will do the changes you suggest.