Problem with devices
-
Melvin
- Posts: 3
- Joined: Wed Oct 23, 2024 5:26 pm
- Real Name: Melvin
Hello, I am currently in the process of setting up lighting technology for an event and controlling it for the first time with QLC+. Unfortunately, the control does not work, the devices do not respond. The interface is recognized in QLC+, I have set the addresses on the devices correctly and wired everything. Does anyone have any idea what it might be?
-
mcallegari
- Posts: 4710
- Joined: Sun Apr 12, 2015 9:09 am
- Location: Italy
- Real Name: Massimo Callegari
- Contact:
OS type/version?
Interface type/model?
Fixtures model?
QLC+ version?
We still don't have mind-reading powers, so a post like this has zero chances to get support without the proper information.
Plus, you have originally posted this as a QLC+ issue....go figure.
Interface type/model?
Fixtures model?
QLC+ version?
We still don't have mind-reading powers, so a post like this has zero chances to get support without the proper information.
Plus, you have originally posted this as a QLC+ issue....go figure.
-
GGGss
- Posts: 3052
- Joined: Mon Sep 12, 2016 7:15 pm
- Location: Belgium
- Real Name: Fredje Gallon
QLC+ usage 101: Before digging further, check the DMX monitor to verify that QLC+ is sending the correct signals. https://docs.qlcplus.org/v4/main-window/dmx-monitor
All electric machines work on smoke... when the smoke escapes... they don't work anymore