Custom light not working in "2D View"
-
iEdwinT
- Posts: 1
- Joined: Tue Aug 20, 2024 8:12 pm
- Real Name: Edwin
I recently bought these light and had to make their profile. I believe I did everything right as everything works as expected when I plug them in to power and DMX. But in 2D View, they only ever show as black or off. What am I doing wrong?
- Attachments
-
Riukoe-PLW012.qxf- (2.08 KiB) Downloaded 54 times
-
- Light Show.qxw
- (23.93 KiB) Downloaded 52 times
-
MichelSliepenbeek
- Posts: 726
- Joined: Wed Feb 08, 2023 10:24 am
- Location: Nederland
- Real Name: Michel Sliepenbeek
The problem is in your Fixture Definition.
Both your Dimmer and Strobe channel are set as Intensity, so basically you have two Master Dimmer Channels. QLC+ cannot handle that.
Try this one:
If you would have used the on line Fixture Vallidator ( https://www.qlcplus.org/fixture_validator.php ), it would have given you the following Message:
Both your Dimmer and Strobe channel are set as Intensity, so basically you have two Master Dimmer Channels. QLC+ cannot handle that.
Try this one:
- Riukoe-PLW012 v2.qxf
- (2.14 KiB) Downloaded 50 times
If you would have used the on line Fixture Vallidator ( https://www.qlcplus.org/fixture_validator.php ), it would have given you the following Message:
ERROR: channel <Strobe> group should be set to 'Shutter'
A QLC Workspace is like a Bob Ross painting: "it's your world, you can create whatever you want!"