Hello,
I want to control a fog machine. I would like to be able to change the ejection time and the non-ejection time differently.
This is not possible with a chaser or a sequencer.
Or very simply:
A fog machine widget would be nice
With: - ejection time
- non-ejection time
- fog volume
- fan speed
Is this possible in a soon coming version?
Control 2 steps differently in a chaser.
- GGGss
- Posts: 3052
- Joined: Mon Sep 12, 2016 7:15 pm
- Location: Belgium
- Real Name: Fredje Gallon
What I always use is a chaser with asymmetrical timing.
Before show time, I define the utmost fog a venue can have. So, basically, create a mist—way too much for the venue. Remember that ventilation and open (closed) doors may influence this behaviour.
Now, this said, I have the 'output fog' setting fixed in a scene. In general, I set the fan speed to a value that will reach the other side of the stage and get an even mist.
With the help of a zero-fog scene, I have a chaser with two steps. The off-scene and the 'output fog'-scene. Both share the hold at the same time.
With the help of a Speed Dial widget—this is what you are after—I can dynamically set the amount of fog I'm producing, whether slow pulses or fast pulses. The fan speed stays constant.
https://docs.qlcplus.org/v4/virtual-console/speed-dial
Before show time, I define the utmost fog a venue can have. So, basically, create a mist—way too much for the venue. Remember that ventilation and open (closed) doors may influence this behaviour.
Now, this said, I have the 'output fog' setting fixed in a scene. In general, I set the fan speed to a value that will reach the other side of the stage and get an even mist.
With the help of a zero-fog scene, I have a chaser with two steps. The off-scene and the 'output fog'-scene. Both share the hold at the same time.
With the help of a Speed Dial widget—this is what you are after—I can dynamically set the amount of fog I'm producing, whether slow pulses or fast pulses. The fan speed stays constant.
https://docs.qlcplus.org/v4/virtual-console/speed-dial
All electric machines work on smoke... when the smoke escapes... they don't work anymore
-
- Posts: 12
- Joined: Thu Nov 02, 2023 7:17 am
- Real Name: Norman Killat
-
- Posts: 12
- Joined: Thu Nov 02, 2023 7:17 am
- Real Name: Norman Killat
Could you perhaps create a little example .qxw for me?GGGss wrote: ↑Thu Aug 08, 2024 6:47 am What I always use is a chaser with asymmetrical timing.
Before show time, I define the utmost fog a venue can have. So, basically, create a mist—way too much for the venue. Remember that ventilation and open (closed) doors may influence this behaviour.
Now, this said, I have the 'output fog' setting fixed in a scene. In general, I set the fan speed to a value that will reach the other side of the stage and get an even mist.
With the help of a zero-fog scene, I have a chaser with two steps. The off-scene and the 'output fog'-scene. Both share the hold at the same time.
With the help of a Speed Dial widget—this is what you are after—I can dynamically set the amount of fog I'm producing, whether slow pulses or fast pulses. The fan speed stays constant.
https://docs.qlcplus.org/v4/virtual-console/speed-dial
-
- Posts: 12
- Joined: Thu Nov 02, 2023 7:17 am
- Real Name: Norman Killat
I have 2 devices.
1. Evolite Hazebox 1500
https://www.evolite-pro.com/evolite-haz ... 56095.html
https://static.evolite-pro.com/pdf/manu ... ox1500.pdf
and:
2. MARQ Lighting Haze 800
https://gzhls.at/blob/ldb/8/a/3/4/65b09 ... e906e9.pdf
1. Evolite Hazebox 1500
https://www.evolite-pro.com/evolite-haz ... 56095.html
https://static.evolite-pro.com/pdf/manu ... ox1500.pdf
and:
2. MARQ Lighting Haze 800
https://gzhls.at/blob/ldb/8/a/3/4/65b09 ... e906e9.pdf
-
- Posts: 432
- Joined: Thu Apr 23, 2015 6:43 am
- Real Name: Ken Coughlin
Unless I'm misunderstanding what you're trying to do, since you can control the fan speed and fog output separately, I don't really see the problem.
If I want to have a low fog output with a high fan speed, I can create a Scene with the fan set to 255 and the fog set to 32. If I need the fan to run longer than the fog, I can create another Scene with the fan at 255 and the fog at 0. Put one Scene after the other in a Chase and set the Fade In, Fade Out and Duration of each step. Each individual Scene can be used and reused numerous times within a Chase.
You can create any number of Scenes with various Fan and Output levels. I've used foggers in this manner for years.
If I want to have a low fog output with a high fan speed, I can create a Scene with the fan set to 255 and the fog set to 32. If I need the fan to run longer than the fog, I can create another Scene with the fan at 255 and the fog at 0. Put one Scene after the other in a Chase and set the Fade In, Fade Out and Duration of each step. Each individual Scene can be used and reused numerous times within a Chase.
You can create any number of Scenes with various Fan and Output levels. I've used foggers in this manner for years.