Hello everyone,
I am a complete beginner in qlc+. I have 4 Pavotube T8-7X (Nanlite). My final goal is to connect them via dmx and make them light up in rhythm with music.
My dmx interface is the Enntec Dmx usb Pro.
In Qlc+, the fixture did not exist, so I created it. Here are the images.
But nothing happens once I am in the function or console tab. Just a white light comes on...
I must have configured something incorrectly, thank you very much. for your help
Nanlite PavoTube T8-7X
-
damienfrance
- Posts: 3
- Joined: Sat Aug 10, 2024 6:52 am
- Real Name: Damien
Others images
- Attachments
-
-
-
MichelSliepenbeek
- Posts: 741
- Joined: Wed Feb 08, 2023 10:24 am
- Location: Nederland
- Real Name: Michel Sliepenbeek
If you use the Fixture Validator (https://www.qlcplus.org/fixture_validator.php), it will tell you that you need to create at least one Mode.
Furthermore your channels 1, 3 and 4 are all set as Intensity. This way you leave it to QLC to decide which of the the three is your Master Level channel. You need to be more specific (= change 3 and 4).
If you want your Fixture to show up in the 2d Monitor you need to set the dimensions as well.
Furthermore your channels 1, 3 and 4 are all set as Intensity. This way you leave it to QLC to decide which of the the three is your Master Level channel. You need to be more specific (= change 3 and 4).
If you want your Fixture to show up in the 2d Monitor you need to set the dimensions as well.
A QLC Workspace is like a Bob Ross painting: "it's your world, you can create whatever you want!"
-
damienfrance
- Posts: 3
- Joined: Sat Aug 10, 2024 6:52 am
- Real Name: Damien
Thanks for the answer.
I found out that the problem is with my Pavotube Nanlite T8-7X.
You would have to give them a dmx address from what I understood.
I have a dmx interface: enttec dmx usb pro.
It's too complicated for me, I can't figure it out.
There is no menu in the tubes.
It looks like I need to use software. I tried dmx control.
I need help !
I found out that the problem is with my Pavotube Nanlite T8-7X.
You would have to give them a dmx address from what I understood.
I have a dmx interface: enttec dmx usb pro.
It's too complicated for me, I can't figure it out.
There is no menu in the tubes.
It looks like I need to use software. I tried dmx control.
I need help !
-
edogawa
- Posts: 635
- Joined: Thu May 07, 2015 10:34 am
- Real Name: Edgar Aichinger
http://classic-en.nanlite.com/services/downloads?cid=16
here you can find the manual. I only skimmed over it quickly but it says you should be able to set the DMX address via a DMX/RDM control board (I doubt QLC+ can do this, though), or via their smartphone control app.
Sorry I can't spend more time on this now, but it looks to be too cool a fixture to give up so early
here you can find the manual. I only skimmed over it quickly but it says you should be able to set the DMX address via a DMX/RDM control board (I doubt QLC+ can do this, though), or via their smartphone control app.
Sorry I can't spend more time on this now, but it looks to be too cool a fixture to give up so early