Creating a Step-Advance Button in a Virtual Console

Ask a generic question about the usage of QLC+, not related to a particular operating system
Post Reply
Masatoshi
Posts: 25
Joined: Wed Apr 24, 2024 9:53 pm
Location: japan
Real Name: Masatoshi

Is there a way to create a button in a virtual console that advances one step with each press, similar to a Step or Go button?
For instance, for gobos, I would like to create a button that progresses in the order of Open → gobo1 → gobo2 → gobo3 → spin ccw each time it's pressed.
However, I haven't been successful.
How do you usually create such a button?
kenact
Posts: 434
Joined: Thu Apr 23, 2015 6:43 am
Real Name: Ken Coughlin

It sounds like you're looking for a Chase, which can be set up on the Functions tab and added to the Virtual Console.
ShagLight
Posts: 121
Joined: Wed Feb 15, 2023 5:13 pm
Real Name: David

I have that very same function. In my case, I use this with a par chase, but here's how to do it assuming you want to change gobos:

Create scenes for each gobo you want to use.
Put them in a chaser and set the hold to infinity (check the infinity check box).
Put that chaser in a cue list set to "play/stop+pause. In the drop down menu, choose the default or whichever suits you needs.

You can then assign a button on an external controller (if you have one) or a hot key to the next and/or previous step on the cue list.

Hope this helps!
NO, I AM NOT THE SOUNDMAN!
User avatar
GGGss
Posts: 3052
Joined: Mon Sep 12, 2016 7:15 pm
Location: Belgium
Real Name: Fredje Gallon

ShagLight wrote: Fri Jun 21, 2024 4:24 pm I have that very same function. In my case, I use this with a par chase, but here's how to do it assuming you want to change gobos:

Create scenes for each gobo you want to use.
Put them in a chaser and set the hold to infinity (check the infinity check box).
Put that chaser in a cue list set to "play/stop+pause. In the drop down menu, choose the default or whichever suits you needs.

You can then assign a button on an external controller (if you have one) or a hot key to the next and/or previous step on the cue list.

Hope this helps!
Adding to Shaglight's solution, you may use a dimmer in a Loopback universe and a scene with that dimmer. Now add a button in flash mode to your VC and bind this to the loopback scene.
Alter the chaser's behaviour so that it uses the loopback dimmer as an input signal for the 'next cue'. Flashing now will advance your chaser.
All electric machines work on smoke... when the smoke escapes... they don't work anymore
MichelSliepenbeek
Posts: 716
Joined: Wed Feb 08, 2023 10:24 am
Location: Nederland
Real Name: Michel Sliepenbeek

For an example you could look overhere: viewtopic.php?p=70325#p70325
A QLC Workspace is like a Bob Ross painting: "it's your world, you can create whatever you want!"
Post Reply