BCF2000 not detecting value changes

Ask a generic question about the usage of QLC+, not related to a particular operating system
Forum rules
Post Reply
ThijsSmeel
Posts: 6
Joined: Fri Feb 16, 2024 9:55 am
Real Name:

Hello everyone,
I own a BCF2000 midi console and I had it working with QLC+. But yesterday some other people used the console and messed everything up. Now QLC doesn't recognize the console. This is what I checked:

BCF2000 is booted in BC mode
BCF2000 is set to U1 mode
BCF2000 is shown in the list of devices.
When I move a slider, no indication of value change shows.
Something inside the settings of the console changed, since It worked before.
When I select the BCF2000 as input device, I get this error message:
qlcplus_vbsSHk4SCI.png
qlcplus_vbsSHk4SCI.png (6.88 KiB) Viewed 677 times
What do I have to change to get everything working again?
Top
Yestalgia
Posts: 419
Joined: Thu Jun 17, 2021 9:31 am
Location: Australia
Real Name:
Contact:
Contact Yestalgia

Try restarting the PC, the BCF 2000 seems to be being used by some other program.

There may also be multiple instances of QLC+ running.

Hope this helps.
Top
ThijsSmeel
Posts: 6
Joined: Fri Feb 16, 2024 9:55 am
Real Name:

Yes, thanks. Restarting the system worked
Top
Post Reply

Return to “Generic”