Hello
Is there a way to control the light using the sound that the computer just playing?
Soundselect
-
GGGss
- Posts: 3052
- Joined: Mon Sep 12, 2016 7:15 pm
- Location: Belgium
- Real Name: Fredje Gallon
That is a little tricky... it all depends on the driver of your built-in audio card.
Some audio cards have a (hidden) setting called Stereo Mix. Enabling and using this, audio is played back from the output to the input bus. QLC+ can now use this stereo mix as input for its audio widget.
If the audio card drivers do not have this capability, you could try to connect the audio output with an 'aux'-cable to the computer's input, but nowadays, they only provide one audio port.
Some audio cards have a (hidden) setting called Stereo Mix. Enabling and using this, audio is played back from the output to the input bus. QLC+ can now use this stereo mix as input for its audio widget.
If the audio card drivers do not have this capability, you could try to connect the audio output with an 'aux'-cable to the computer's input, but nowadays, they only provide one audio port.
All electric machines work on smoke... when the smoke escapes... they don't work anymore
-
RobTjotji
- Posts: 6
- Joined: Tue Mar 22, 2022 12:14 pm
- Real Name: Robert
ThanksGGGss wrote: ↑Mon Dec 11, 2023 10:18 am That is a little tricky... it all depends on the driver of your built-in audio card.
Some audio cards have a (hidden) setting called Stereo Mix. Enabling and using this, audio is played back from the output to the input bus. QLC+ can now use this stereo mix as input for its audio widget.
If the audio card drivers do not have this capability, you could try to connect the audio output with an 'aux'-cable to the computer's input, but nowadays, they only provide one audio port.