Launchpad MK2 - Flashing Buttons for feedback

This is a place for sharing with the community the results you achieved with QLC+, as a sort of use case collection.
You can share photos, videos, personal hardware/software projects, interesting HOWTO that might help other users to achieve great results.
Post Reply
ljack
Posts: 12
Joined: Sat Jan 19, 2019 7:40 pm
Real Name: Jakob

I always liked the feedback on the AKAI APCs where the active buttons can be set to flash.
For a long time now I've been using my Launchpad MK2 to trigger scenes, but I was never happy with a solid feedback colour.
Now I found a quick fix in the "Programmers Reference Manual": Just set the MIDI output channel of the Launchpad to 2 (in the Inputs/Outputs-Page of QLC+) and your active buttons will start to flash between their static and their feedback colour.

Sorry if this is an obvious solution to everyone else, it just took me ages to figure it out and I thought it might be helpful to someone else. :D
Top
Yestalgia
Posts: 421
Joined: Thu Jun 17, 2021 9:31 am
Location: Australia
Real Name:
Contact:
Contact Yestalgia

Thanks for sharing!
Top
Post Reply

Return to “Community”