Hi all - I've got a Chauvet slimPAR 64 RGBA but QLC does not seem to recognize all 8 channels when using 8 Channel, only the first 4 when on 4 Channel.
I set my slimPar to Channel 8 and the address to 1 which is connected to my ENTEC DMX USB PRO, connected to my laptop (mac)
I create my Universe with the out being the ENTEC above
I add a fixture and select my Chauvet slimPar 64 RGBA > set Mode to 8 channel > Universe to Universe 1 and click Ok
I go to my Simple Desk where I can see all 8 channels appropriately titled and set up as faders, but when I use any of the sliders, I get no lights.
As previously mentioned, I am able to get this to work fine when using 4 Channel instead of 8 Channel.
Any idea what I might be doing wrong??? Oh, and I should say I'm using QLC+ version 4.11.2
Thanks!
QLC Not recognizing all channels
-
edogawa
- Posts: 631
- Joined: Thu May 07, 2015 10:34 am
- Real Name: Edgar Aichinger
I seee that 4 channel mode just has the four colors, 8 channel mode adds color macros, strobe, a mode channel and a master dimmer.
So the first thing to ask, have you raised the master dimmer before trying any color channel? Otherwise you won't see any output, of course.
So the first thing to ask, have you raised the master dimmer before trying any color channel? Otherwise you won't see any output, of course.
-
witchghetto
- Posts: 4
- Joined: Fri Jun 30, 2023 11:43 pm
- Real Name: Humbert
THAT WAS IT!! Thanks so much. I'm coming from using some cheapo lights that didn't have a dimmer option, so that was new to me.edogawa wrote: ↑Sun Jul 02, 2023 8:26 am I seee that 4 channel mode just has the four colors, 8 channel mode adds color macros, strobe, a mode channel and a master dimmer.
So the first thing to ask, have you raised the master dimmer before trying any color channel? Otherwise you won't see any output, of course.