This chaser is not working as I want
-
Eddie
- Posts: 23
- Joined: Fri Jul 24, 2020 1:02 am
- Real Name: Nahuel
Hi to all again. I have the following chaser
It is doing what I want untin step 3 where there should be a fade out of 500ms but instead it inmediately jumps to step 4 and is not doing any fade in or out. What Im I doing wrong ? Thank to all for the help !!
-
GGGss
- Posts: 3052
- Joined: Mon Sep 12, 2016 7:15 pm
- Location: Belgium
- Real Name: Fredje Gallon
Step 3 instructs to fade-in with 0ms and hold 0ms. Then it steps to the next one.
What you described is what QLC+ is intended to do.
Solution: put the fade-out in step 2 (since it is the same scene)
What you described is what QLC+ is intended to do.
Solution: put the fade-out in step 2 (since it is the same scene)
All electric machines work on smoke... when the smoke escapes... they don't work anymore