Elation SIX PAR Z19 IP

Here you can share your fixture definitions with the community
Forum rules
Post Reply
Sophia1
Posts: 54
Joined: Tue Oct 11, 2022 7:53 am
Real Name: Sophia

Hi everyone,

I got a few Elation SIX PAR Z19 IP, and I'm trying to create a QFX.

I've done the best I can here 😅

Can someone please answer my questions and check that I've done everything currectly?

1) I set the "type" as "other", as I haven't seen "LED".
2) The Lumens I put are: "13,240". This number is specifically for all lights together @ 3m, 5 degrees. Don't know if that's what I should have done...
3) I'm getting those errors. I'm guessing that it's because I didn't configure "heads"?
I haven't found in the user guide of the fixture any mention of the heads 😬
Any clue about how can I know how many heads are they, and how to configure them?

"
ERROR: In mode <07CH>, channel <RED> cannot act on itself!
ERROR: In mode <07CH>, channel <GREEN> cannot act on itself!
ERROR: In mode <07CH>, channel <BLUE> cannot act on itself!
ERROR: In mode <07CH>, channel <WHITE> cannot act on itself!
ERROR: In mode <07CH>, channel <AMBER> cannot act on itself!
ERROR: In mode <07CH>, channel <UV> cannot act on itself!
ERROR: In mode <07CH>, channel <ZOOM> cannot act on itself!
ERROR: In mode <09CH>, channel <RED> cannot act on itself!
ERROR: In mode <09CH>, channel <GREEN> cannot act on itself!
ERROR: In mode <09CH>, channel <BLUE> cannot act on itself!
ERROR: In mode <09CH>, channel <WHITE> cannot act on itself!
ERROR: In mode <09CH>, channel <AMBER> cannot act on itself!
ERROR: In mode <09CH>, channel <UV> cannot act on itself!
ERROR: In mode <09CH>, channel <ZOOM> cannot act on itself!
ERROR: In mode <09CH>, channel <Master Dimmer> cannot act on itself!
ERROR: In mode <09CH>, channel <Master Dimmer FINE> cannot act on itself!
ERROR: In mode <10CH>, channel <RED> cannot act on itself!
ERROR: In mode <10CH>, channel <GREEN> cannot act on itself!
ERROR: In mode <10CH>, channel <BLUE> cannot act on itself!
ERROR: In mode <10CH>, channel <WHITE> cannot act on itself!
ERROR: In mode <10CH>, channel <AMBER> cannot act on itself!
ERROR: In mode <10CH>, channel <UV> cannot act on itself!
ERROR: In mode <10CH>, channel <ZOOM> cannot act on itself!
ERROR: In mode <10CH>, channel <Master Dimmer> cannot act on itself!
ERROR: In mode <10CH>, channel <Master Dimmer FINE> cannot act on itself!
ERROR: In mode <10CH>, channel <Sutter Strobe> cannot act on itself!
ERROR: In mode <14CH>, channel <RED> cannot act on itself!
ERROR: In mode <14CH>, channel <GREEN> cannot act on itself!
ERROR: In mode <14CH>, channel <BLUE> cannot act on itself!
ERROR: In mode <14CH>, channel <WHITE> cannot act on itself!
ERROR: In mode <14CH>, channel <AMBER> cannot act on itself!
ERROR: In mode <14CH>, channel <UV> cannot act on itself!
ERROR: In mode <14CH>, channel <ZOOM> cannot act on itself!
ERROR: In mode <14CH>, channel <Master Dimmer> cannot act on itself!
ERROR: In mode <14CH>, channel <Master Dimmer FINE> cannot act on itself!
ERROR: In mode <14CH>, channel <Sutter Strobe> cannot act on itself!
ERROR: In mode <14CH>, channel <Color Macros> cannot act on itself!
ERROR: In mode <14CH>, channel <Program Macros> cannot act on itself!
ERROR: In mode <14CH>, channel <Program Speed> cannot act on itself!
ERROR: In mode <14CH>, channel <Dimming Curve Modes> cannot act on itself!
ERROR: Global physical dimensions are missing or incomplete. Please fill them.

14 channels found. 4 modes found.

41 errors were detected. Please fix before submitting.
"

Thank you so much!!! ❤️

Sophia
Top
Sophia1
Posts: 54
Joined: Tue Oct 11, 2022 7:53 am
Real Name: Sophia

QFX is attached.

I can't upload the user guide here is it's more than 2MB :(((

I'm attaching the link:
https://www.elationlighting.com/six-par-z19-ip

Thank you!! 😍

Sophia
Top
Sophia1
Posts: 54
Joined: Tue Oct 11, 2022 7:53 am
Real Name: Sophia

QFX
Attachments
Elation-SIX-PAR-Z19-IP.qxf
(8.8 KiB) Downloaded 256 times
Top
User avatar
edogawa
Posts: 632
Joined: Thu May 07, 2015 10:34 am
Real Name: Edgar Aichinger

1) For multicolor LED PARs etc. I usually choose "Color changer" as fixture type

2) I wouldn't loose hair about a wrong lumen number... the fixture validator doesn't complain if it's missing, and I'm not sure if or how QLC makes use of that info at all.

3) That's not because of missing heads definitions. Heads are used if your light has more than one group of light sources that can act independently (like sections in a LED Bar)
The reason is that you filled in the "Acts on" field for each mode, in the mode editor. This has been introduced a while ago, and the documentation mentions:
The "Acts on" column is used to bind a channel to another. For example a channel that controls the speed of a rotating gobo.
I don't know why everyone thinks they have to set this to the same channel, just leave it unset. This misunderstanding comes up with almost every other definition posted here, recently... I don't know how we could make it more obvious to not touch that parameter unless needed.
Top
Sophia1
Posts: 54
Joined: Tue Oct 11, 2022 7:53 am
Real Name: Sophia

Thank you for your reply!

Now I understand...

If I may suggest, you can just add "(optional) by the "Acts on", which will make everything clearer :)

Now the QFX passed the validator and should be ready to go.

Thank you again for the explanation!! 😍

Sophia
Top
Sophia1
Posts: 54
Joined: Tue Oct 11, 2022 7:53 am
Real Name: Sophia

QFX - passed validator
Attachments
Elation-SIX-PAR-Z19-IP.qxf
(8.37 KiB) Downloaded 231 times
Top
MichelSliepenbeek
Posts: 720
Joined: Wed Feb 08, 2023 10:24 am
Location: Nederland
Real Name: Michel Sliepenbeek

An other example for "Acts On" could be: Program Speed acts on Program Macros (Channel 13 acts on channel 12) .

You can change it if you also Change:
- your Fixture Type to Color Changer (it is mainly how it looks in the Fixture Editor)
- "Sutter" to "Shutter"" :( :shock: :D
A QLC Workspace is like a Bob Ross painting: "it's your world, you can create whatever you want!"
Top
Sophia1
Posts: 54
Joined: Tue Oct 11, 2022 7:53 am
Real Name: Sophia

Done :)

Thank you for your suggestions!! ❤️

Sophia
Top
Sophia1
Posts: 54
Joined: Tue Oct 11, 2022 7:53 am
Real Name: Sophia

Updated QFX
Attachments
Elation-SIX-PAR-Z19-IP.qxf
(8.39 KiB) Downloaded 268 times
Top
Sophia1
Posts: 54
Joined: Tue Oct 11, 2022 7:53 am
Real Name: Sophia

An issue I'm having with the fixture: I set all the Z19 fixtures to "Strobbing: 255" (which means no strobbing, just steady light), but on the QLC monitor, it shows that the Z19 are blinking for some reason 🤔

Anyone have any idea why?

Thank you so much!! 🤗

Sophia
Top
Sophia1
Posts: 54
Joined: Tue Oct 11, 2022 7:53 am
Real Name: Sophia

PFA example
Top
Sophia1
Posts: 54
Joined: Tue Oct 11, 2022 7:53 am
Real Name: Sophia

Attached
Attachments
Strobbing.gif
Top
User avatar
mcallegari
Posts: 4722
Joined: Sun Apr 12, 2015 9:09 am
Location: Italy
Real Name: Massimo Callegari
Contact:
Contact mcallegari

Added, thanks
Quite a pity for the anonymous color macros (not even the manual lists their RGB codes :()
Top
Sophia1
Posts: 54
Joined: Tue Oct 11, 2022 7:53 am
Real Name: Sophia

Thank you!

Any idea why the Z19's are still blinking (on the QLC monitor) when strobing is on 255 (255 is configured as "lamp on"?

QFX and video/gif are above, QFW is below...

Thank you!!

Sophia
Top
Sophia1
Posts: 54
Joined: Tue Oct 11, 2022 7:53 am
Real Name: Sophia

QFW
Attachments
Bank24.qxw
(179.47 KiB) Downloaded 245 times
Top
Sophia1
Posts: 54
Joined: Tue Oct 11, 2022 7:53 am
Real Name: Sophia

I've fixed the strobbing problem, so I've made a new version. Sorry for the confusion!
Top
Sophia1
Posts: 54
Joined: Tue Oct 11, 2022 7:53 am
Real Name: Sophia

Latest version
Attachments
Elation-SIX-PAR-Z19-IP.qxf
(8.41 KiB) Downloaded 252 times
Top
Post Reply

Return to “Fixture definitions”