Set start position (tilt & pan) of my moving heads

Ask a generic question about the usage of QLC+, not related to a particular operating system
Forum rules
Post Reply
Eaglepuxx
Posts: 2
Joined: Mon Jan 23, 2023 12:57 pm
Real Name: Mikey

Hey

Everytime I boot up my moving heads, they are at random start positions. When running an EFX, the pattern is not so smooth. If I want to obtain that, I have to manually force the heads to point the same way - but this can't be the only way to do it and also it seems like it's not great for the motor inside.

Is there such a feature in QLC+ to set a start position using pan and tilt for every moving head in my setup? :-)

Regards
Mike
Top
janosvitok
Posts: 1325
Joined: Mon Apr 13, 2015 7:05 am
Location: Bratislava, Slovakia
Real Name: Jano Svitok
Contact:
Contact janosvitok

What moving heads do you use? By default, Qlc+ emits 0s o all channels - that should set the heads to one of the extremes on both axes.
It is suspicious if they end in random position.
Top
User avatar
GGGss
Posts: 3055
Joined: Mon Sep 12, 2016 7:15 pm
Location: Belgium
Real Name: Fredje Gallon

And on top of QLC+ emitting 0-zeros, the heads should reset to know their 0-position.
If they don't behave like that, you might fear that the end position switches inside the head are faulty.
Also, on some types of heads, you can mimic a reset by setting a specific DMX value for a number of seconds. The head will soft reset PAN/TILT.
All electric machines work on smoke... when the smoke escapes... they don't work anymore
Top
Eaglepuxx
Posts: 2
Joined: Mon Jan 23, 2023 12:57 pm
Real Name: Mikey

I see they are working as expected now. Setting pan/tilt to 0, position them both at the same angel.
Thank you both :-)
Top
Post Reply

Return to “Generic”