Universe View, change address visualization issue

Report an issue that you found while using QLC+ 5.x.
Please provide as many details as you can, a sample workspace if available and don't forget to read the forum posting guidelines first !
Post Reply
giacomo
Posts: 553
Joined: Tue May 26, 2015 6:17 pm
Real Name:

hi Massimo,
at least in Gnome 42.4 the universe is not fully showed and it's impossible to move a fixture to an address not exposed, the problem is that when I select the fixture the window doesn't scroll and the movement is limited to the addresses present on the screen.
The buttons to zoom don't do anything, similar to this report:
viewtopic.php?f=35&t=15733

test file:
UniverseView.qxw
(5.75 KiB) Downloaded 68 times
in this case I cannot move the MAC Viper #1 to the free address 441.
A workaround is to move some of the other fixtures to a different universe to make some space in the window, anyway it can be tricky because I cannot cut a fixture at the end of the universe: if I scroll down I lose the cut button...

my screen:
UniverseView.qxw
(5.75 KiB) Downloaded 68 times
Attachments
Screenshot from 2022-08-28 12-31-23.png
User avatar
mcallegari
Posts: 4710
Joined: Sun Apr 12, 2015 9:09 am
Location: Italy
Real Name: Massimo Callegari
Contact:

I just fixed this too. The selection of a fixture blocked the scrolling
User avatar
GGGss
Posts: 3052
Joined: Mon Sep 12, 2016 7:15 pm
Location: Belgium
Real Name: Fredje Gallon

THX Massimo
All electric machines work on smoke... when the smoke escapes... they don't work anymore
Post Reply