I'm not Ashamed of my QLC+ Past

This is a place for sharing with the community the results you achieved with QLC+, as a sort of use case collection.
You can share photos, videos, personal hardware/software projects, interesting HOWTO that might help other users to achieve great results.
Post Reply
giacomo
Posts: 553
Joined: Tue May 26, 2015 6:17 pm
Real Name:

Hello community,
last week we've played again an "old" show in Grec Festival, Barcelona,
- I'm not Ashamed of My Communist Past -
Credits here:
https://www.barcelona.cat/grec/es/espec ... unist-past
AshamedNot.jpg
They recorded the performance and here a little excerpt:
https://my.opendesktop.org/s/Jo3axdQzsSR5rNd

Very easy setup, originally with QLC+ 4.10.3 + open Enttec + NanoKontrol 2.
QLC+ has worked always very well, the weak point has been the time needed to make the necessary adaptation on each venue.
Have a good summer!
Top
User avatar
sbenejam
Posts: 607
Joined: Sun Apr 12, 2015 6:28 pm
Real Name: Santiago Benejam Torres
Contact:
Contact sbenejam

QLC+ is a very good software. Nice job.
;-)
Top
Ampul
Posts: 1
Joined: Sun Nov 26, 2023 7:27 pm
Real Name: Thijs

Hi, I'm just starting with QLCplus. I'm already running it on an rpi with a DMX board from bitwizard. So far, everything works fine.
I own a Nanokrontol 2. I have the latest driver for Windows for that, but in qlcplus, only knobs seems to work a little, no sliders, no buttons. I have KORG nanoKONTROL 2 as input and Profile too.
Any ideas what I am missing?
Top
User avatar
GGGss
Posts: 3052
Joined: Mon Sep 12, 2016 7:15 pm
Location: Belgium
Real Name: Fredje Gallon

Thijs, Welcome to the forum,

You will find quite some thread dealing with the nanocontrol.
In short: check emulation mode and midi settings inside QLC+.
Have a look here: viewtopic.php?t=11941
All electric machines work on smoke... when the smoke escapes... they don't work anymore
Top
Post Reply

Return to “Community”