Hi, I am watching Massimos tutorials and following along to setting up scenes. My lights are not responding as they are in the video. I’ve followed along and added my fixtures but they are not responding to the enabled channel sliders.
The lights respond when I switch back to simple desk and move the channel sliders.
Why are they not responding to the sliders in the scenes function?
Thank you!
Scenes function not responding
-
GGGss
- Posts: 3052
- Joined: Mon Sep 12, 2016 7:15 pm
- Location: Belgium
- Real Name: Fredje Gallon
Welcome to this forum.
You talk about switching back to simple desk -> I think there is your solution.
Simple Desk has upmost priority. When you touch the faders in simple desk, these channels are 'blocked' with values set by the simple desk.
Press the red X's so simple desk is switched free.
Now you will be able to preview your scenes again.
You talk about switching back to simple desk -> I think there is your solution.
Simple Desk has upmost priority. When you touch the faders in simple desk, these channels are 'blocked' with values set by the simple desk.
Press the red X's so simple desk is switched free.
Now you will be able to preview your scenes again.
All electric machines work on smoke... when the smoke escapes... they don't work anymore
-
edogawa
- Posts: 630
- Joined: Thu May 07, 2015 10:34 am
- Real Name: Edgar Aichinger
Another reason could be that your virtual console is in Run mode - red square near top right corner. If that's the case you have to explicitely deselect Blind mode in the scene editor (the icon showing slash across eye)