3D View: No devices displayed

[stkrumm]

Hi,
maybe I am doing something completely wrong, but I followed each step shown in Massimo's video:
https://www.youtube.com/watch?v=i-UhT793fTw
I used the same devices as Massimo, 2D View (Top, left side, front, right side) display ok.
However, in 3D only an empty stage appears. What could I be missing?
Thanks in advance,
Stefan

OS: macOS Monterey 12.3.1
Mac Mini M1
QLC+ 5.0.0 Beta1

I attach screenshots from the side view and stage

[joshhmccauley]

Same issue here. Except, 3D view stopped displaying fixtures after it was working fine for awhile. I was using the QLC+ 5 Visualizer to display my workspace in 4.12.5, through artnet. Was working without issue for a couple weeks, but then stopped functioning, and I have since not been able to get the 3D view to display anything in either a qlc 5 workspace or a qlc 4 workspace.

Have tried on a Windows 10 Enterprise desktop and a Windows 11 laptop.

[TWCH]

Adding certain buggy fixtures in seems to break the whole program and most fixtures stop displaying afterwards.

[mcallegari]

Can anyone provide a project file that I can use to reproduce the issue?

[TWCH]

Can anyone provide a project file that I can use to reproduce the issue?

Here's an example file. After adding in the CS-1000RGB laser, the spot's light disappears. Can still pan/tilt the fixture, but no light is being displayed even though the dimmer + shutter is up.

On another note, the CS-1000RGB laser is invisible in the 3D viewer and when you try to select the fixture via the Fixture Groups tab or doing select all, the whole program crashes.

https://drive.google.com/file/d/1lKJJDS ... sp=sharing

[mcallegari]

Lasers are not supported/displayed in the 3D view
These are the rendered ones:
https://github.com/mcallegari/qlcplus/t ... s/fixtures

I could spend some time on fixing the crash and modeling a simple laser, but laser simulation is not planned in any case.

[TWCH]

Lasers are not supported/displayed in the 3D view
These are the rendered ones:
https://github.com/mcallegari/qlcplus/t ... s/fixtures

I could spend some time on fixing the crash and modeling a simple laser, but laser simulation is not planned in any case.

Out of curiosity, how come there's no plans for laser simulation? Is it too difficult?

[mcallegari]

Yes, it is.
Plus there's no longer a developer working on the 3D preview, so it goes beyond my skills.

[joshhmccauley]

Adding certain buggy fixtures in seems to break the whole program and most fixtures stop displaying afterwards.

I recently revisited this in an attempt to use the 3d View again, and this was indeed the problem.

I went back through my fixture files and removed a few of the ones I created when this started happening.. 3D View is working again.